Leica Digitex Signal Transmitters
Fully protected in the hardest conditions, to be used with Leica Digicat locators to trace the route of buried utilities and provide depth estimation. When using a locator with depth estimation capabilities.
Main Benefits
The i-Series signal transmitters (Gennys) are compact, robust and easy to use. They are dual frequency transmitters that have been designed in conjunction with the DIGICAT cable locators to easily and accurately avoid, trace or locate buried cables and pipes.
We would always recommend using a Digitex signal transmitter whenever you are trying to locate buried utilities.
- Improved utility detection in areas of high signal interference
- Enables depth estimation, when using a depth estimation cable locator
- Enables you to locate non-conductive utilities (i.e. not giving off an active signal) by applying an active signal onto the utilities. The signal can then be traced using any DIGICAT locator. Using Digitex signal transmitter this way will help you locate around 50% more buried utilities than using a DIGICAT cable locator alone.
Which is the right product for you?
Both of the DIGITEX i-Series signal transmitters (100T and 300T) come with the following intelligent features:
- Modes:
- 33kHz
- 8kHz
- 8kHz and 33kHz (connection mode)
- Clear audio and visual controls
- Built-in test function, allowing operators to test the hardware and software is functioning correctly before use.
DIGITEX 100T is a 1 Watt signal transmitter.
A robust signal transmitter for use before excavation work.
DIGITEX 300T is a 3 Watt signal transmitter.
Ideal to use if you are frequently locating in areas with high signal interference or larger excavation areas.
The i-Series signal transmitters are ideal for use in these industries
Network Rail Approved
The Digitrace enables non-metallic drains, ducts or pipes, up to 150mm in diameter, to be traced when used in conjunction with the Leica Digicat and Digitex signal transmitter. The Digitrace’s coiled fibre-glass rod, which protects the central copper tracing conductor, is available in lengths of 30 metres, 50 metres or 80 metres. The fibre-glass rod is inserted and pushed along in the service under investigation. The Leica Digitex is connected and the tracing signal is located on the surface by the Leica Digicat.
| Features | Digitex 100T | 300T | Signal Clamp | Digimouse (Sonde) | Property Connection |
| Frequencies | 8.192 kHz | 32.768 kHz | Mixed 8/33 | 8 kHz | 33 kHz | 8 kHz | 33 kHz | 33 kHz |
| Protection |
IP67 (case lid closed) | IP65 (case lid open) |
IP54 | IP54 | IP54 |
| Working Temperature | -20°C to +50°C | -20°C to +50°C | -20°C to +50°C | -20°C to +50°C |
| Battery Type | 4 x D Alkaline | Not required | 1 x LR6 (AA) alkaline | Not required |
| Battery Life (Typical Use at 20°C) | 30 hrs intermittent use | NA | 40 hrs intermittent use at 20°C/68°F in 8kHz mode or 33kHz mode | NA |
